Sony Ericsson Z550i

This phone has a Bluetooth® wireless implementation compatible with "Blue&Me™" device.
Phones behaviour or results may differ from those described here due to a different firmware release.

Functions Supported Dial from the car kit Yes Reject incoming call Yes Redial Yes User defined ring tone (kept from the phone) No Network provider name Yes Conference call Yes Call waiting (second incoming call) Yes Caller ID as stored in the phonebook Yes Contacts download one by one Yes by selection Yes fully automatic Yes Transfer the audio out to your phone (private call) Yes Muting (Local privacy) Yes SMS reader Yes

How to pair

Before using your mobile phone with Blue&Me™, you must create a pairing relationship between the mobile phone and Blue&Me™. After this procedure, Blue&Me™ will automatically connect to your phone each time that you enter the car and turn the car's key to the 'on' position.

To create a pairing relationship using manual interaction, follow these steps when the car is not moving:
Navigate to the Blue&Me Setup / Setup, Pairing, and then press <SRC> or <TEL>. Blue&Me™ starts the pairing procedure.
Blue&Me™ shows the mobile phone pairing PIN number on the display screen and also speaks the PIN number.

• Press MENU, select SETTINGS, tap the knob left once to select CONNECTIVITY
• Select BLUETOOTH, TURN ON if not already ON
• Select MY DEVICES, and press NEW DEVICE.
• Select "Blue&Me", and enter the PIN, press OK.
• Select MY DEVICES, select Blue&Me, press MORE.
• Select ALLOW CONNECTION, select ALWAYS ALLOW.
  

Phonebook download

If your mobile phone doesn't support automatic downloading during phone pairing, or if you want to send individual contact entries to "Blue&Me™", the ADD CONTACTS item will be available in the USER DATA menu.
To add mobile phone contacts to "Blue&Me™" using manual interaction:
While a mobile phone is connected to "Blue&Me™", navigate to SETTINGS, USER DATA, and then select ADD CONTACTS.
Then on the mobile phone proceed as follows:

Sending contacts one-by-one

• Press MENU, select CONTACTS
• Select MORE, select SEND CONTACT
• Select VIA BLUETOOTH, select Blue&Me

Sending more contacts

• Press MENU, select CONTACTS, select OPTIONS
• Select ADVANCED, select SEND ALL CONTACTS
• Select VIA BLUETOOTH , select Blue&Me

Tips & Tricks

Read firmware version:

• From the phone's splash screen
• Press the joystick to the right once
• Press the * key
• Press the joystick to the left twice
• Press the * key
• Press the joystick to the left once
• Press the * key

Read IMEI code:

• From the phone's splash screen, type the code: *#06#

  From the IMEI is possible to extract the following info:

XXXXXX	XX	XXXXXX	X
TAC	FAC	SNR	SP
TAC = Type Approval Code (first 2 digits = country code)
FAC = Final Assembly Code
SNR = Serial Number.
SP = Spare (always SP=0)

The fabrication date is expressed by means of a number of four digits. For the telephones produced before the 1/1/96 the format is MMYY, where: MM stands for month, YY stands for year (eg. 1095 means October 1995). The format is WWYY, where: WW indicates the chronological number of the week from the beginning of the year and YY indicates the year (eg. 3097 means the thirtieth week of 1997).