Nokia 6600

This phone has a Bluetooth® wireless implementation compatible with "Blue&Me™" device.
Phones behaviour or results may differ from those described here due to a different firmware release.

Functions Supported Dial from the car kit Yes Reject incoming call Yes Redial Yes User defined ring tone (kept from the phone) Yes Network provider name No Conference call Yes Call waiting (second incoming call) No Caller ID as stored in the phonebook Yes Contacts download one by one Yes by selection No fully automatic No Transfer the audio out to your phone (private call) No(1) Muting (Local privacy) Yes SMS reader No

How to pair

Before using your mobile phone with Blue&Me™, you must create a pairing relationship between the mobile phone and Blue&Me™. After this procedure, Blue&Me™ will automatically connect to your phone each time that you enter the car and turn the car's key to the 'on' position.

To create a pairing relationship using manual interaction, follow these steps when the car is not moving:
Navigate to the Blue&Me Setup / Setup, Pairing, and then press <SRC> or <TEL>. Blue&Me™ starts the pairing procedure.
Blue&Me™ shows the mobile phone pairing PIN number on the display screen and also speaks the PIN number.

• From the main menu, select CONNECTIONS, select BLUETOOTH.
• Select PAIRED DEVICES tapping the knob to the right.
• Select OPTION, select NEW PAIRED DEVICE.
• Select "Blue&Me".
• Enter the PIN, press OK.
• After the 'beep', accept connection request pressing YES.

It is suggested to enable the automatic connection between Blue&Me™ and the phone.
To trust the connection proceed as follow:

• In the BLUETOOTH menu, select OPTIONS.
• Select SET AS AUTHORISED, confirm with YES.
• All future connections within Blue&Me™ and the phone will be automatically established.

Phonebook download

If your mobile phone doesn't support automatic downloading during phone pairing, or if you want to send individual contact entries to "Blue&Me™", the ADD CONTACTS item will be available in the USER DATA menu.
To add mobile phone contacts to "Blue&Me™" using manual interaction:
While a mobile phone is connected to "Blue&Me™", navigate to SETTINGS, USER DATA, and then select ADD CONTACTS.
Then on the mobile phone proceed as follows:

Sending contacts one-by-one

• Select MENU, select CONTACTS
• Select the contact, select OPTIONS
• Select SEND, select VIA BLUETOOTH
• Select Blue&Me

Tips & Tricks

(1) Audio transfer:

The phone disconnects Bluetooth when user transfers the audio path to the phone. To workaround the problem while disconnected press <TEL> button twice to re-establish the connection and transfer the audio path back to the Blue&Me™ device.

Auto Answer:

• From your phone, display the main menu, select the TOOLS icon.
• Select SETTINGS, select ENHANCEMENTS, select HANDSFREE.
• Select AUTOMATIC ANSWER, select OPTIONS, select CHANGE, select ON, press OK.

Read firmware version:

• From the phone's splash screen
• Press *#0000#